Product type |
Uninterrupted power supply; Offline |
Capacity |
400VA/200W |
Input |
Phase: Single |
|
Voltage: 110/120 VAC or 220/230/240 VAC |
|
Voltage range: 90~145 VAC / 170~270 VAC ±4VAC |
|
Frequency: 50 / 60Hz |
|
Frequency range: Min. 43HZ |
Output |
Phase: Single |
|
Voltage: 120 VAC or 220 VAC |
|
Voltage regulation ( Batt. mode ): ± 10% |
|
Frequency: 50 Hz or 60Hz |
|
Frequency redulation ( Batt. mode ): ±1Hz |
|
Output waveform ( Batt. mode ): Modified sinewave |
Power factor |
0.5 |
Battetry |
Battery type & number: 12V/4,5Ah *1 pc |
|
Back up time ( at a PC load with 15″ monitor ): 6~9 minutes |
|
Back up time ( at a PC load with 17″ monitor ): N/A |
|
Recharge time: 10 hours to 90% after complete discharge |
Transfer time |
Typical: 2-6ms, 12ms Max |
Indicator |
AC mode: Green lighting |
|
Battery mode: Green LED flashing every 4 seconds |
|
Low battery at battery mode: Green LED flashing every second |
|
Fault: Red LED lighting |
|
Battery weak at AC mode: Red LED flashing every 2 seconds for 30 seconds |
|
Battery fault at AC mode: Red LED flashing 3 times every 2 seconds |
|
Overload: N/A |
Audible alarm |
Battery mode: Sounding every 4 seconds |
|
Low battery at battery mode: Sounding every second |
|
Fault: Continuously Sounding |
|
Battery weak at AC mode: Sounding every 2 seconds for 30 seconds |
|
Battery fault at AC mode: Sounding 3 times every 2 seconds |
|
Battery replacement: N/A |
|
Overload: N/A |
Protection |
Full protection: Discharge, overcharge, and overload protection |
Physical |
Dimension, D*W*H (mm): 176.5*80*230 |
|
Net weight (kg): 2.5 |
Environment |
Operating Environment: 0- 40°C, 0-90 % relative humidity (non-condensing) |
|
Noise Level: Less than 40dB |
Interface |
Smart RS-232: N/A |
|
USB Port: N/A |